Payment & Shipping Terms:
|Detection Gas:||Combustible Gas||Sensor:||Low Power Semiconductor|
|Preheating Time:||15 To 30 Seconds||Battery:||2*AA (alkaline) Batteries|
1. can detector many kinds of combustible gas , such as methane, natural gas, etc.
2. It is adopted high sensitive metal oxide sensor (MOS) and high performance microprocessor (MPU) .
3. Low power consumption.
4. Long life performance.
5. Sound and light alarm.
Batteries: 2*AA (alkaline) batteries
Auto switch off: about 5 minutes
Life performance: about 6000 times (2 minutes each time)
Slight alarm value: about 500ppm
Strong alarm value: about 2000ppm
Preheating time: 15 to 30 seconds
Response time: instant
1. Switch on: Long-time press on/off button,three lights(yellow, red and green) will be turned on, then the yellow light, red light and green light will flash circularly, finally the yellow light and red light will stop twinkle, the green light will keep bright and the equipment will buzz discontinuously, In this case, it means the equipment has been prepared detecting.
2. Detecting: Let the end of leak detector approach to the detected area. When the yellow light is turned on and alarm, it means that there is a slight leakage. When the red light is turned on and alarm, it means that there is a strong leakage. (Remark: when the green flash, it indicate the battery should be replaced as soon as possible)
3. Switch off: Long-time press on/off button till all light is turned off . Or let the detector in the environment without combustible gas 5 minutes, the detector will switch off automatically.
Detect the gas pipeline weekly and the fireplace after turning off. Especially valve, joint and pipe bend. Please moving detector slowly, and moving detector repeatedly if the alarm occurs. Then you can find where the gas is leaking.
Problem Shooting :
1. If the gas leak detector can’t be turned on, check battery or replace. if the problem still cannot solved, Please contact with distributor for assistance.
2. Equipment cannot detect combustible gas, for example, put the detector at the mouth of the alcohol bottle, If detector do not alarm, the sensor maybe damaged, Please contact with distributor for assistance.
1. Please do not detect the pure combustible gas, for example detect lighter gas, it will cause damage by high concentration impact.
2. Keep the detector away newly decorated furniture, because there will be silicide and halogen, the detector sensor will be poisoned.
3. Please take out the battery for a long time without use.